Router question - RunUO

06-04-2003, 03:45 AM

im running a D-Link DL-604 im trying to figure out how to set up a server on my second pc thru it. anyone with any ideas?

Quantos · 06-04-2003, 11:44 AM

Forward the port on the router, then edit your serverlist.cs. If you want to put them both on UO Gateway your out of luck though, UO Gateway will only allow one shard per IP address on their list. If it is a second shard make sure you set the serverlist.cs for a different port, say port 2594 like Wolverana did.

Escalus · 06-04-2003, 05:10 PM

You could also do like I did, and add your computer to the DMZ (thru the D-Link)

WooT · 06-07-2003, 05:27 PM

ok DMZ ? cause im having problems with my dlink router also :P and im a newb with routers so what is DMZ and where can i find it lol. and is it anything like NO-IP?

Tz'arken · 06-07-2003, 05:36 PM

if your having trouble with your router, you could simply call D-Links customer support

06-07-2003, 06:20 PM

I don't remember exactly what DMZ stands for but I do know the Z stands for Zone. By putting a computer in the DMZ your giving all request packets a default path unless you specify a particular port to be sent to another computer. If I'm wrong please correct me.

**psz** · 06-07-2003, 06:30 PM

De-Militarized Zone

Cyranor · 06-08-2003, 06:10 AM

how to :

open the setup page from your 604

choose lan, choose advanced, choose virtual server

now you see the setup screen for an vitual server. Verify that you click on enable the ID (if you still have the default settings, it should be ID 1).

Service Port : This is the port from your server, usually 2593
well known services : blank
Service IP : Where the request should been forwarded (your server IP)
Schedule : always (or if you want an time schedule, change it )

Choose Apply and save it

Thats all

WooT · 06-12-2003, 01:35 AM

Virtual Server
Virtual Server is used to allow Internet users access to LAN services.
Enabled Disabled
Name "my server name"
Private IP "my computers ip"
Protocol Type TCP UDP Both << which one
Private Port 2593
Public Port 2593

Schedule Always

so this is what it should look like after im done right???? (the stuff in yellow)
srry bout late post i couldnt find this thread then gave up till today lol.

06-04-2003, 03:45 AM	#1 (permalink)
shadeuo Guest Posts: n/a	Router question im running a D-Link DL-604 im trying to figure out how to set up a server on my second pc thru it. anyone with any ideas?

06-04-2003, 11:44 AM	#2 (permalink)
Quantos Master of the Internet Join Date: Apr 2003 Location: Edmonton, AB Age: 41 Posts: 6,867	Forward the port on the router, then edit your serverlist.cs. If you want to put them both on UO Gateway your out of luck though, UO Gateway will only allow one shard per IP address on their list. If it is a second shard make sure you set the serverlist.cs for a different port, say port 2594 like Wolverana did. __________________ Paranoia is what happens when you finally have all of the facts.

06-07-2003, 06:30 PM	#7 (permalink)
psz UO Gamers: Demise Administrator Join Date: Oct 2002 Location: Swamp Age: 29 Posts: 10,800	De-Militarized Zone __________________ psz Demise' Creator (Retired) The RunUO.com Forum Moderator Team Former Official RunUO Scripter (Retired) Websites: My 360 Blog My Gaming Site(Old Link) My Gaming Site(New Link)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-04-2003, 05:10 PM	#3 (permalink)
Escalus Join Date: Dec 2002 Posts: 261	You could also do like I did, and add your computer to the DMZ (thru the D-Link)

06-07-2003, 05:27 PM	#4 (permalink)
WooT Join Date: Jun 2003 Location: Iowa Age: 21 Posts: 56	ok DMZ ? cause im having problems with my dlink router also :P and im a newb with routers so what is DMZ and where can i find it lol. and is it anything like NO-IP?

06-07-2003, 05:36 PM	#5 (permalink)
Tz'arken Join Date: Nov 2002 Posts: 158	if your having trouble with your router, you could simply call D-Links customer support

06-07-2003, 06:20 PM	#6 (permalink)
php-junkie Guest Posts: n/a	I don't remember exactly what DMZ stands for but I do know the Z stands for Zone. By putting a computer in the DMZ your giving all request packets a default path unless you specify a particular port to be sent to another computer. If I'm wrong please correct me.

06-08-2003, 06:10 AM	#8 (permalink)
Cyranor Join Date: Oct 2002 Posts: 15	how to : open the setup page from your 604 choose lan, choose advanced, choose virtual server now you see the setup screen for an vitual server. Verify that you click on enable the ID (if you still have the default settings, it should be ID 1). Service Port : This is the port from your server, usually 2593 well known services : blank Service IP : Where the request should been forwarded (your server IP) Schedule : always (or if you want an time schedule, change it ) Choose Apply and save it Thats all

06-12-2003, 01:35 AM	#9 (permalink)
WooT Join Date: Jun 2003 Location: Iowa Age: 21 Posts: 56	Virtual Server Virtual Server is used to allow Internet users access to LAN services. Enabled Disabled Name "my server name" Private IP "my computers ip" Protocol Type TCP UDP Both << which one Private Port 2593 Public Port 2593 Schedule Always so this is what it should look like after im done right???? (the stuff in yellow) srry bout late post i couldnt find this thread then gave up till today lol.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)