How do i??? - RunUO

DragonNick · 02-01-2005, 01:43 AM

what would i have to set my port as to make a local server that doesnt have anything to deal with my public server so i can test scripts instead of constant restart's ???

also can i run 2 clients at once for say im running my 1.0 and want to test 1.0.0 without having to shut down my 1.0 ? just set the local for the 1.0.0 ?

TMSTKSBK · 02-01-2005, 03:13 AM

You're on the right track.

Edit the serverlist.cs (it's under the IP string, says Listensomething=2593) for the alternate (non-production) server to a port other than 2593 (or whatever port the regular one is on). Then set the new local serverlisting in UOGateway to the same port as the new (edited) server. Run the edited server (yes in conjunction with the normal one), and use the new local serverlisting to get on the shard.

In answer to question 2: yes, you can use 2 clients simultaneously...even on the same shard with different accounts (or two different ones). Hope this helps...

DragonNick · 02-01-2005, 12:52 PM

TY I am going to try it out now see if it works and i will let ya know TY again

02-01-2005, 01:43 AM	#1 (permalink)
DragonNick Join Date: Dec 2004 Age: 26 Posts: 40	How do i??? what would i have to set my port as to make a local server that doesnt have anything to deal with my public server so i can test scripts instead of constant restart's ??? also can i run 2 clients at once for say im running my 1.0 and want to test 1.0.0 without having to shut down my 1.0 ? just set the local for the 1.0.0 ?

02-01-2005, 03:13 AM	#2 (permalink)
TMSTKSBK Master of the Internet Join Date: Feb 2004 Location: NC/NC State Univ Age: 23 Posts: 16,424	You're on the right track. Edit the serverlist.cs (it's under the IP string, says Listensomething=2593) for the alternate (non-production) server to a port other than 2593 (or whatever port the regular one is on). Then set the new local serverlisting in UOGateway to the same port as the new (edited) server. Run the edited server (yes in conjunction with the normal one), and use the new local serverlisting to get on the shard. In answer to question 2: yes, you can use 2 clients simultaneously...even on the same shard with different accounts (or two different ones). Hope this helps... __________________ Goodbye, folks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-01-2005, 12:52 PM	#3 (permalink)
DragonNick Join Date: Dec 2004 Age: 26 Posts: 40	TY I am going to try it out now see if it works and i will let ya know TY again

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)