problems with some doors working - RunUO

Gator81 · 03-03-2005, 03:12 PM

I have had problems setting doors that work.

The first example is the deamon temple, the doorway that goes under the temple I have tried setting a door, when i get a door set it will not open or close.

the next is for a fence that I put up, and I cannot get a door to work there either. I can set it but it will not open or close.

any suggestions?

thanks

Ninja-AoI · 03-03-2005, 03:20 PM

It might be that you are adding the ART for the door, but not a TRUE door. (Which is why you can see it, but it doesn't function.)

I would suggest that you get Pandora's Box. There is a Tab in that program that makes door creation simple and easy.

Quantos · 03-03-2005, 03:21 PM

I'm going to suggest that you get and use Pandora's Box. It's an excellent tool for working on your shard, it even has a category dedicated to doors.

<edit>I think I've just been Ninja'd</edit>

Ninja-AoI · 03-03-2005, 03:23 PM

Quote:

Originally Posted by Quantos

I think I've just been Ninja'd

WooT. It's about time I got you. :P

Gator81 · 03-03-2005, 03:37 PM

Quote:

Originally Posted by Ninja-AoI

It might be that you are adding the ART for the door, but not a TRUE door. (Which is why you can see it, but it doesn't function.)

I would suggest that you get Pandora's Box. There is a Tab in that program that makes door creation simple and easy.

I have used Pandora's Box to set the doors and they still dont work.

????

a friend has got it to work, dunno why but its working now

Ninja-AoI · 03-03-2005, 03:46 PM

If you used Pandora's Box to place the door, then the only other thing that it might have been is it something was blocking the door from swinging.

If not place properly on the wall it will not be able to swing.

Phaera · 03-07-2005, 12:35 AM

there is a program that i used a while back that all it does is makes doors i know i have it some where i will find it then be back to give it to you works great see ya soon

LotharKillian · 03-08-2005, 09:57 PM

I had this same problem some time back.. Silly Me i was using the doors in Deco. I did finally open my eyes and see the little tab that says Doors. To say the least this fixed my problem

Gator81 · 03-09-2005, 12:49 PM

Quote:

Originally Posted by LotharKillian

I had this same problem some time back.. Silly Me i was using the doors in Deco. I did finally open my eyes and see the little tab that says Doors. To say the least this fixed my problem

I think that may of been my problem too

03-03-2005, 03:12 PM	#1 (permalink)
Gator81 Join Date: Jan 2005 Age: 45 Posts: 176	problems with some doors working I have had problems setting doors that work. The first example is the deamon temple, the doorway that goes under the temple I have tried setting a door, when i get a door set it will not open or close. the next is for a fence that I put up, and I cannot get a door to work there either. I can set it but it will not open or close. any suggestions? thanks

03-03-2005, 03:21 PM	#3 (permalink)
Quantos Master of the Internet Join Date: Apr 2003 Location: Edmonton, AB Age: 41 Posts: 6,867	I'm going to suggest that you get and use Pandora's Box. It's an excellent tool for working on your shard, it even has a category dedicated to doors. <edit>I think I've just been Ninja'd</edit> __________________ Paranoia is what happens when you finally have all of the facts.

03-07-2005, 12:35 AM	#7 (permalink)
Phaera Join Date: Mar 2003 Posts: 133	there is a program that i used a while back that all it does is makes doors i know i have it some where i will find it then be back to give it to you works great see ya soon __________________ silvermyst3@hotmail.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-03-2005, 03:20 PM	#2 (permalink)
Ninja-AoI Join Date: Feb 2005 Age: 34 Posts: 107	It might be that you are adding the ART for the door, but not a TRUE door. (Which is why you can see it, but it doesn't function.) I would suggest that you get Pandora's Box. There is a Tab in that program that makes door creation simple and easy.

03-03-2005, 03:46 PM	#6 (permalink)
Ninja-AoI Join Date: Feb 2005 Age: 34 Posts: 107	If you used Pandora's Box to place the door, then the only other thing that it might have been is it something was blocking the door from swinging. If not place properly on the wall it will not be able to swing.

03-08-2005, 09:57 PM	#8 (permalink)
LotharKillian Join Date: Jun 2004 Posts: 9	I had this same problem some time back.. Silly Me i was using the doors in Deco. I did finally open my eyes and see the little tab that says Doors. To say the least this fixed my problem

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)