Using UOGateway with Razor (Step by Step) - RunUO

reverian · 09-07-2003, 06:52 PM

This is a brief step by step on how to adjust UOGateway to allow Razor to start upon entering the shard of your choice. I hope this post does not offend anyone at its simplicity, but I just now figured it out though trial and error. I also had read a post where a Long-Time Member of this forum had the same issue getting Razor to work with UOGateway. So here are the steps below...

1. Open UOGateway.

2. Click on the "Settings" button located along the left hand side of the program screen.

3. You will see a few headings. Under the "Settings" heading there will be many options. One of those options is "Use third party tool:".

4. Click on the drop down menu to the right of the option "Use third party tool:".

5. Choose "Razor" from the dropdown menu.

6. Click on the "Save Settings" button.

7. Close UOGateway and reopen (optional).

8. Reopen UOGateway and click on the appropriate shard that you wish to connect to.

I hope this helps the people who are having issues connecting through UOGateway with Razor. This step by step is valid for UOGateway version 1.8. Not tested on other versions.

ADDITIONAL NOTE: Also remember to change the "Use Third Party Tool:" in each specific shard you connect to. This can be done by clicking on the folder looking image to the right of the shard name that you connect to.

Scott Hathaway

**Zippy** · 09-07-2003, 07:54 PM

Excellent post, I was actually going to do one of these but hadn't gotten around to it. I will extend this post to include....

How to use Razor without UOGateway
You can choose a server on the 'welcome screen' and wiull be written to you login.cfg (YOU WILL LOOSE YOUR OLD LOGIN.CFG!)...

If you want to run a custom or riced client they are also available on the welcome screen, just browse for them.

Razor and multi UO
Razor DOES support multi-uo functionality, HOWEVER the current version of the UOG.dll that razor uses does not. When the next uog.dll comes out with multi-uo support razor should also support multi UO with no problems.

09-08-2003, 04:04 AM

im not good with computer stuff.... but its not letting me change the third party user in the shard Edit File. how do i do this

thanks

09-16-2003, 01:52 AM

Quote:

Originally Posted by reverian

3. You will see a few headings. Under the "Settings" heading there will be many options. One of those options is "Use third party tool:".

4. Click on the drop down menu to the right of the option "Use third party tool:".

5. Choose "Razor" from the dropdown menu.

etc.....

Alright, when I click settings, I don't have anything like that.. I just click settings and I can choose 2d or 3d and small options.. Is there a different version I need? Perhaps I have UOGateway lite? I have version 1.8!

silverwolfe · 09-16-2003, 01:54 AM

if im not mistaken i had to update 1.8 it doesnt give a version revision but adds razor support

09-16-2003, 02:09 AM

That didn't work. I still have no place anywhere where I can choose 3rd party programs! I need help!

interesting · 09-19-2003, 11:58 AM

:? I have done everything you listed but... when I open Razor it still opens my original uo account not my gateway account.
thanks for the step by step to get me this far.

Yyrkoon · 09-20-2003, 12:09 PM

All this is fine and dandy, however whats wrong with just adding the address into the address box on the Razor start up screen ? Of course I personaly play only one shard . . .

Yyrkoon · 09-20-2003, 12:11 PM

All this is fine and dandy, however whats wrong with just adding the address into the address box on the Razor start up screen ? Of course I personaly play only one shard . . .

FallsUpStairs · 09-21-2003, 05:49 PM

Quote:

Originally Posted by fiadamom

:? I have done everything you listed but... when I open Razor it still opens my original uo account not my gateway account.
thanks for the step by step to get me this far.

You need to get on the shard from UOG still... UOG will start Razor for you (If you chose the Use Third Party Tool as noted.).

Bruno · 10-15-2003, 10:16 PM

i cant start razor with uogateway...
says a error message about crypt.dll
im using a 3d client of uo

**Zippy** · 10-17-2003, 04:09 PM

What message, which client version, what emulator, what Razor version

And do not answer any of these questions with "newest"

09-07-2003, 06:52 PM	#1 (permalink)
reverian Forum Newbie Join Date: Jun 2003 Posts: 62	Using UOGateway with Razor (Step by Step) This is a brief step by step on how to adjust UOGateway to allow Razor to start upon entering the shard of your choice. I hope this post does not offend anyone at its simplicity, but I just now figured it out though trial and error. I also had read a post where a Long-Time Member of this forum had the same issue getting Razor to work with UOGateway. So here are the steps below... 1. Open UOGateway. 2. Click on the "Settings" button located along the left hand side of the program screen. 3. You will see a few headings. Under the "Settings" heading there will be many options. One of those options is "Use third party tool:". 4. Click on the drop down menu to the right of the option "Use third party tool:". 5. Choose "Razor" from the dropdown menu. 6. Click on the "Save Settings" button. 7. Close UOGateway and reopen (optional). 8. Reopen UOGateway and click on the appropriate shard that you wish to connect to. I hope this helps the people who are having issues connecting through UOGateway with Razor. This step by step is valid for UOGateway version 1.8. Not tested on other versions. ADDITIONAL NOTE: Also remember to change the "Use Third Party Tool:" in each specific shard you connect to. This can be done by clicking on the folder looking image to the right of the shard name that you connect to. Scott Hathaway

09-07-2003, 07:54 PM	#2 (permalink)
Zippy Administrator Join Date: Aug 2002 Location: Baltimore, MD Age: 25 Posts: 4,870	Excellent post, I was actually going to do one of these but hadn't gotten around to it. I will extend this post to include.... How to use Razor without UOGateway You can choose a server on the 'welcome screen' and wiull be written to you login.cfg (YOU WILL LOOSE YOUR OLD LOGIN.CFG!)... If you want to run a custom or riced client they are also available on the welcome screen, just browse for them. Razor and multi UO Razor DOES support multi-uo functionality, HOWEVER the current version of the UOG.dll that razor uses does not. When the next uog.dll comes out with multi-uo support razor should also support multi UO with no problems. __________________ Zippy, Razor Creator and RunUO Core Developer The RunUO Software Team "Intuition, like a flash of lightning, lasts only for a second. It generally comes when one is tormented by a difficult decipherment and when one reviews in his mind the fruitless experiments already tried. Suddenly the light breaks through and one finds after a few minutes what previous days of labor were unable to reveal." ~The Cryptonomicon

09-08-2003, 04:04 AM	#3 (permalink)
Lost User Guest Posts: n/a	What if #1 im not good with computer stuff.... but its not letting me change the third party user in the shard Edit File. how do i do this thanks

09-19-2003, 11:58 AM	#7 (permalink)
interesting Join Date: Oct 2003 Posts: 1	Almost there but... :? I have done everything you listed but... when I open Razor it still opens my original uo account not my gateway account. thanks for the step by step to get me this far.

09-20-2003, 12:09 PM	#8 (permalink)
Yyrkoon Join Date: Aug 2003 Posts: 30	Re: Using UOGateway with Razor (Step by Step) All this is fine and dandy, however whats wrong with just adding the address into the address box on the Razor start up screen ? Of course I personaly play only one shard . . .

09-16-2003, 02:09 AM	#6 (permalink)
zav Guest Posts: n/a	That didn't work. I still have no place anywhere where I can choose 3rd party programs! I need help!

09-20-2003, 12:11 PM	#9 (permalink)
Yyrkoon Join Date: Aug 2003 Posts: 30	Re: Using UOGateway with Razor (Step by Step) All this is fine and dandy, however whats wrong with just adding the address into the address box on the Razor start up screen ? Of course I personaly play only one shard . . .

10-15-2003, 10:16 PM	#11 (permalink)
Bruno Join Date: Oct 2003 Posts: 1	i cant start razor with uogateway... says a error message about crypt.dll im using a 3d client of uo

10-17-2003, 04:09 PM	#12 (permalink)
Zippy Administrator Join Date: Aug 2002 Location: Baltimore, MD Age: 25 Posts: 4,870	What message, which client version, what emulator, what Razor version And do not answer any of these questions with "newest" __________________ Zippy, Razor Creator and RunUO Core Developer The RunUO Software Team "Intuition, like a flash of lightning, lasts only for a second. It generally comes when one is tormented by a difficult decipherment and when one reviews in his mind the fruitless experiments already tried. Suddenly the light breaks through and one finds after a few minutes what previous days of labor were unable to reveal." ~The Cryptonomicon

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode