Im having a problem with my router. - RunUO

wdec · 09-22-2003, 10:50 PM

Alright I cant get people in the shard to help me build. They get their account made adn get to the serverlist and click advance but it disconnects them there. I tried just a direct connect to my cable and it let them in fine, unfortunately I cant leave it that way. I set the router to forward port 2593 but am still having the same result. Any suggestions?

wdec · 09-22-2003, 11:52 PM

Also I should add that its a 3com router

Phantom · 09-23-2003, 07:58 AM

I posted a FAQ in the FAQ forum, on how to get a router setup working correctly.

wdec · 09-23-2003, 08:13 AM

Any chance i could get a link im not to familiar with this place.

wdec · 09-23-2003, 08:20 AM

Nevermind i found it

wdec · 09-23-2003, 08:23 AM

this may seem like a dumb question but i dont care as long as i figure all this out. what exactly are we supposed to do with that code on your post or do we do anything with it...

Phantom · 09-23-2003, 08:27 AM

I explained what the problem is in the guide itself. Once you follow the directions, you should be able to allow connections from both inside your lan and outside of it.

hobbel · 09-23-2003, 09:43 AM

in that FAQ it tells you which files to edit, just do a search for the script name, (which is probably going to be (runuo directory)/scripts/misc/ServerList.cs.

you edit that file with the changes that are suggested, you change the IP addresses to fit your setup and away you go

Feid · 09-23-2003, 12:46 PM

Also you may want to be aware, if you follow those instructions and you still can't connect... try a new network card. I was having people freeze on "Entering Britania". I changed the onboard NIC for a 3com NIC and never had a problem since.

09-22-2003, 10:50 PM	#1 (permalink)
wdec Join Date: Oct 2003 Posts: 43	Im having a problem with my router. Alright I cant get people in the shard to help me build. They get their account made adn get to the serverlist and click advance but it disconnects them there. I tried just a direct connect to my cable and it let them in fine, unfortunately I cant leave it that way. I set the router to forward port 2593 but am still having the same result. Any suggestions?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-22-2003, 11:52 PM	#2 (permalink)
wdec Join Date: Oct 2003 Posts: 43	Also I should add that its a 3com router

09-23-2003, 07:58 AM	#3 (permalink)
Phantom Account Terminated Join Date: Sep 2002 Age: 26 Posts: 3,846	I posted a FAQ in the FAQ forum, on how to get a router setup working correctly.

09-23-2003, 08:13 AM	#4 (permalink)
wdec Join Date: Oct 2003 Posts: 43	Any chance i could get a link im not to familiar with this place.

09-23-2003, 08:20 AM	#5 (permalink)
wdec Join Date: Oct 2003 Posts: 43	Nevermind i found it

09-23-2003, 08:23 AM	#6 (permalink)
wdec Join Date: Oct 2003 Posts: 43	this may seem like a dumb question but i dont care as long as i figure all this out. what exactly are we supposed to do with that code on your post or do we do anything with it...

09-23-2003, 08:27 AM	#7 (permalink)
Phantom Account Terminated Join Date: Sep 2002 Age: 26 Posts: 3,846	I explained what the problem is in the guide itself. Once you follow the directions, you should be able to allow connections from both inside your lan and outside of it.

09-23-2003, 09:43 AM	#8 (permalink)
hobbel Join Date: Oct 2003 Posts: 34	in that FAQ it tells you which files to edit, just do a search for the script name, (which is probably going to be (runuo directory)/scripts/misc/ServerList.cs. you edit that file with the changes that are suggested, you change the IP addresses to fit your setup and away you go

09-23-2003, 12:46 PM	#9 (permalink)
Feid Forum Novice Join Date: Jun 2003 Location: California Age: 25 Posts: 116	Also you may want to be aware, if you follow those instructions and you still can't connect... try a new network card. I was having people freeze on "Entering Britania". I changed the onboard NIC for a 3com NIC and never had a problem since.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)