Walking on added tiles - RunUO

Tsarina9 · 02-12-2004, 01:17 AM

How do I make it so that I can walk on already added tiles? I made a house manually using [tile static but I can't walk on the roof or floor because I made them myself, which makes it a pretty useless house...

doe90 · 02-12-2004, 06:30 PM

go to [props your self and check Z in it
and make sure the tile is the same.....

tis · 02-13-2004, 09:07 AM

Or just use "[get z" and targ self and "[get z", targ tile. You can also see if it is possible to walk on the tiles by "[tele"ing on a tile and trying to walk. If you can't walk then the tiles are set to block at which point you can "[props" them and change that. Another option is "[unfreeze"ing and deleting and replacing. If its just a "z" thing then I would add stairs to compensate. If the tiles have to be reset, deleting may be faster.

WiGGiT · 02-13-2004, 12:06 PM

I always use the Box to create my custom buildings and have never had a problem walking on the tiles.

ben98346 · 02-15-2004, 12:47 AM

Thanks you guys.

02-12-2004, 01:17 AM	#1 (permalink)
Tsarina9 Computer Gal! Join Date: Oct 2003 Location: New York Posts: 157	Walking on added tiles How do I make it so that I can walk on already added tiles? I made a house manually using [tile static but I can't walk on the roof or floor because I made them myself, which makes it a pretty useless house... __________________ Who says you need to be a guy to be obsessed with computers?!

02-13-2004, 12:06 PM	#4 (permalink)
WiGGiT Join Date: Dec 2003 Posts: 72	Alot of work! I always use the Box to create my custom buildings and have never had a problem walking on the tiles. __________________ -=WiGGiT=- AKA Admin Logic UoWorld All your bases are belong to us!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-12-2004, 06:30 PM	#2 (permalink)
doe90 Join Date: Dec 2003 Posts: 182	go to [props your self and check Z in it and make sure the tile is the same.....

02-13-2004, 09:07 AM	#3 (permalink)
tis Join Date: Feb 2004 Location: Buffalo NY Age: 39 Posts: 17	Or just use "[get z" and targ self and "[get z", targ tile. You can also see if it is possible to walk on the tiles by "[tele"ing on a tile and trying to walk. If you can't walk then the tiles are set to block at which point you can "[props" them and change that. Another option is "[unfreeze"ing and deleting and replacing. If its just a "z" thing then I would add stairs to compensate. If the tiles have to be reset, deleting may be faster.

02-15-2004, 12:47 AM	#5 (permalink)
ben98346 Join Date: Oct 2003 Posts: 1	Thanks you guys.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)