World Loading Problem - RunUO

Reacted · 01-22-2006, 11:07 PM

Ok, i read a post about this before but it didnt help me resolve this.

i login using uorice the un encrypted client2d and then i go to the shard and when it goes to load the map it says Welcome to Britania and it stays at the same screen. the addresses are right i took them right from the RunUO client when it starts up. the client is fully patched and up to date. im not sure what else could be causing this. please help

Reacted · 01-22-2006, 11:16 PM

where can i get UO gateway (im a noob). thanks for your help!

Reacted · 01-22-2006, 11:22 PM

nevermind i got it, but UO is installed on my D drive and it says i have no client. how do i direct it to my d drive?

Joeku · 01-22-2006, 11:25 PM

Quote:

Originally Posted by Reacted

nevermind i got it, but UO is installed on my D drive and it says i have no client. how do i direct it to my d drive?

I don't believe that you can...

Reacted · 01-22-2006, 11:47 PM

im not sure what to do i tried everything. everything is configured right, mabey my router isnt. i have a linksys router and i went into the setup took off the firewall and such and the problem was still there. is there something i should be doing to my router that im not?

Reacted · 01-23-2006, 12:28 AM

how do i forward my ports, are there any instructions?

i have a linksys router.

Reacted · 01-23-2006, 11:24 AM

if i did i wouldnt be askin

**daat99** · 01-23-2006, 11:25 AM

How exactly do you expect us to know what instructions your router have if you don't know it yourself?

Reacted · 01-23-2006, 12:14 PM

well i was hoping someone else had a linksys router and knows how to do it.

Reacted · 01-23-2006, 01:08 PM

i setup the port fowarding, i had to call my router company. but for some reason i still get a blank screen when the map is supposed to load. any ideas?

Reacted · 01-23-2006, 01:50 PM

im using UO Rice.

Reacted · 01-23-2006, 03:09 PM

nope, tried UOGateway it dosent work either. i can connect but i cant load the map, weird stuff.

01-22-2006, 11:07 PM	#1 (permalink)
Reacted Join Date: Jan 2006 Posts: 10	World Loading Problem Ok, i read a post about this before but it didnt help me resolve this. i login using uorice the un encrypted client2d and then i go to the shard and when it goes to load the map it says Welcome to Britania and it stays at the same screen. the addresses are right i took them right from the RunUO client when it starts up. the client is fully patched and up to date. im not sure what else could be causing this. please help

01-23-2006, 12:28 AM	#6 (permalink)
Reacted Join Date: Jan 2006 Posts: 10	how do i forward my ports, are there any instructions? i have a linksys router. Last edited by Reacted; 01-23-2006 at 12:41 AM.

01-23-2006, 11:25 AM	#8 (permalink)
daat99 RunUO Forum Moderator Join Date: Dec 2004 Location: Israel Age: 27 Posts: 8,163	How exactly do you expect us to know what instructions your router have if you don't know it yourself? __________________ I always try to help Sometimes, I don't know how.... My Web Page Forum Rules ------------------------------------------------------------- Extensive OWLTR System \| Token System \| World Teleporters -------------------------------------------------------------

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-22-2006, 11:16 PM	#2 (permalink)
Reacted Join Date: Jan 2006 Posts: 10	where can i get UO gateway (im a noob). thanks for your help!

01-22-2006, 11:22 PM	#3 (permalink)
Reacted Join Date: Jan 2006 Posts: 10	nevermind i got it, but UO is installed on my D drive and it says i have no client. how do i direct it to my d drive?

01-22-2006, 11:47 PM	#5 (permalink)
Reacted Join Date: Jan 2006 Posts: 10	im not sure what to do i tried everything. everything is configured right, mabey my router isnt. i have a linksys router and i went into the setup took off the firewall and such and the problem was still there. is there something i should be doing to my router that im not?

01-23-2006, 11:24 AM	#7 (permalink)
Reacted Join Date: Jan 2006 Posts: 10	if i did i wouldnt be askin

01-23-2006, 12:14 PM	#9 (permalink)
Reacted Join Date: Jan 2006 Posts: 10	well i was hoping someone else had a linksys router and knows how to do it.

01-23-2006, 01:08 PM	#10 (permalink)
Reacted Join Date: Jan 2006 Posts: 10	i setup the port fowarding, i had to call my router company. but for some reason i still get a blank screen when the map is supposed to load. any ideas?

01-23-2006, 01:50 PM	#11 (permalink)
Reacted Join Date: Jan 2006 Posts: 10	im using UO Rice.

01-23-2006, 03:09 PM	#12 (permalink)
Reacted Join Date: Jan 2006 Posts: 10	nope, tried UOGateway it dosent work either. i can connect but i cant load the map, weird stuff.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)