panther said:
In what way? I'm afraid I didn't get a chance to see how it works on OSI shards.
Its not that it doesnt work in runuo its just that it seems to work differently. This is from one of my staff members who played on osi when se came out.
The main difference is that on osi if you have a roof section on floor two that covers a portion of floor one, then you build the rest of floor two as a building and put a roof on floor three to cover that, where the roof line on floor three overhangs the roof line on floor two, the roof tiles on floor two will not disappear. In runuo they do. Which also means that you can't build a roof higher than 6 levels. I noticed serveral houses on osi that had 7 and 8 high roofs. Like this one...
http://stormfiles.no-ip.info/roof/roof.jpg
You can see on this pic of a house we created in osi where the roofs overlap each other with no problem.
On Runuo, however, this kind of over hang would work like this...
http://stormfiles.no-ip.info/roof/roof2.jpg
On Runuo, however, this kind of over hang would work like this...
Stage 1) build lower roof
http://stormfiles.no-ip.info/roof/roof3.jpg
Stage 2) Build upper roof
http://stormfiles.no-ip.info/roof/roof4.jpg
All seems well....but
Stage 3) Go back to lower level and veiw roof....roof tiles disappear...
http://stormfiles.no-ip.info/roof/roof5.jpg
And if you replace the tiles here, when you go to the floor above, you will find the first row on the south side gone.